« MBA at VGP School of Management | Main | M. Tech courses offered by the National Institute of Technology, Kurukshetra »

May 30, 2004

Comments

bharat gohel

hello sir,
i have completed B.E. Electronics & Communication in gujarat university,
i want join M.Tech,
but i am non-Gated candidate,
what can i do for take admission in any M.tech colleages,

also i m working in one embedded company in gujarat as a design engg.

JOTHIRAM.V

dear sir,
i completed my diploma and at present working in tvs hosur.
i want to do my B TECH MECH lateral entry in any colleges through part time or corres
i want addresses of the colleges which prefer
thanks

mohalingam

Hi Sir,
I am ITI qualified and working in MNC company i whant to study the corespondence BE or BTech this is possible or notpossible please advice me.

Yours Truly
Mohalingam

SEENI VASAN

i wish to be study fashion technology in chennai circumference. i studied 10th std.please inform me the colleges as well as the other informstion please...

Ravi bhatia

sir, my self Ravi Bhatia,presently working with MNC co.as a sales & marketing,but i have done Automobile Diploma in Diesel vehicle,i want Automobile Engg. corressponded in this same course,so please breif me what i should to do

b.b.sitaramam

i am a I.T.I ref @ airconditing and intermediate m.p.c i want to study in specilization in r@A.C OR DIPLOMO CORROSPONDENCE

Manzoor Hasan

I had completed my Diploma in engineering in Electrical instrumentation in the year 2002 and currently employed in ABB ltd. however I want to pursue my B.tech/BE through lateral entry. I am ready to resign for carrying out my higher education so kindly suggest where and how can I get admission. I don't get time for preperation of any examination so kindly give the details of those colleges where I can get admission through merit basis only.

BHUJANGA KUMAR ADAPA

IAM A B.TECH IN MECHANICAL ENGINEERING WORKING AS FEA ANALYST?
PLEASE MAIL ME THE DIFFERENT M.TECH PROGRAMMES (AERONAUTICAL OR MECHANICAL)IN INDIA
AVAILABLE AS DISTANCE EDUCATION PROGRAMMES?

MAIL TO: BUBU_310@YAHOO.COM

Rinku Taur

Sir/Mam,
I am a bachelor in civil engg,and m working at present therefore i want to pursue further my career in structural designing .
Kindly provide me with information about prestigious universities/colleges who provide Mtech courses in STRUCTURAL ENGG.Iam presently working in Delhi.
Thanks/Regards

Rajesh Kumar

sir i have done my B-tech in mechanical engg . Plz guide me for correspondence M-tech in Mech engg(any Subject) From any ACITE approved University
Thanks

sathish rajendar

Sir, i have completed my diploma in tamil Nadu (2005). I an working in banglore. Now i would like to do B.E. mech. For which i just applied in indian institution of industrial engg. Navi, mumbai. Let me know whether they are giving exact B.E. or not. Could please suggest me. Thanks & regards sathish.R 09980807580

mayur

sir,
I have done my diploma in electronics & comunication in goa.Presently i am working in very good company.
i want to do corespondance B.E.in goa.sugest me any college in goa or any other way which will give me graduate standard.Without leaving my job.

ganesh nagaraj

hello sir:this is ganesh,iam going to finish my M.Sc IT in annamalai university, june ending , i like to study M.Tech studies in chennai particularly in Madras University, so kindly help me sir, thanking u, bye.reply me.

Vishwaprasad R

Sir,
I have done my B.E in mechanical engg fron NIE Mysore. Plz guide me for correspondence M-tech in Mech engg(any Subject).

While i am searching in the net, got that Institute of Engineers - Calcutta, is offering correspondence M-tech.

But i want to know any other recognised institutions are giving the post graduation.

Thanks

ar.suman sharma

Sir,
Iam B.Arch & teaching in ips.indore as lecturer, want to do M.Arch Part time .ithink i can do it from the here only .
But the admission forms for 07 r not available on site .kindly guide me.
thanhs

anirudh singh

hi sir this is anirudh singh. right now i m studying in diploma of automobile engineering. i want to do correspondence degree after completing my diploma so could please tell any institude where i can get admission.thanking you

anirudh singh

hi sir this is anirudh singh. right now i m studying in diploma of automobile engineering. i want to do correspondence degree after completing my diploma so could please tell any institude where i can get admission.thanking you

seshank

sir,
i have complted my B.Tech in mechanical (2003-2007)from J.N.T.University i wanted to do M.Tech as part-time course .please give tell me details to do my M.Tech .plzzzzz dont mind sir.........................

r.swaminathan

I had completed DME AND I want to further studies through distance engg.MECHANICAL COURSES(BE/BTECH-MECH)
Please give the name of recognised university list by Indian govt/Oversease as soon as possible

Thanks and regards,
swami

hanumantha rao

res sir i have complete my diploma in mechanical engineering (correspondance courses).I want to further studies through distance engg.MECHANICAL COURSES(BE/BTECH-MECH).Please give me name of recognised university listed by indian government. iam staying in trichy. pls give me details as soon as posible thanking u sir.
by
hanumantha rao
tvhr_2006@yahoo.com

hanumantha rao

Comments
IAM B.ARCH
WANT TO DO M.E STRUCTURAL ENGG CORRESPONDENCE COURSE
PLEASE GIVE OR NAME SOME INSTITUTE IN INDIA I STAY IN MUMBAI.
REGARD
ANJALI JHA

Posted by: anjali jha | October 21, 2005 at 05:41 PM

IAM B.ARCH
WANT TO DO M.E STRUCTURAL ENGG CORRESPONDENCE COURSE
PLEASE GIVE OR NAME SOME INSTITUTE IN INDIA I STAY IN MUMBAI.
REGARD
ANJALI JHA

Posted by: anjali jha | October 21, 2005 at 05:42 PM


sir,
i have complted my B.Tech in mechanical (2000-2004)from J.N.T.University i wanted to do M.Tech as part-time course .please give tell me details to do my M.Tech .

Posted by: P.Sandeep Naidu | January 16, 2006 at 10:27 PM

Sirs,

I have done M.Sc., Computer Science and my ambition is to do M.Tech in Computer Science. Im currently working in HCL Technologies Ltd., Chennai. I would like to know if any of the universities are offering this course through distance education mode. Kindly let me know this information.

Thanks & Regards,
Venkat

Posted by: venkateswar | February 21, 2006 at 06:19 PM

hello,
Sir,
i want addmition in M.E. or M.Tech. in electronics department. i apper in B.E. exam in May-2006 from PUNJAB TECHNICAL UNIVERSITY . I donot have GATE score. please give me responce sir. i m waiting.And is there any procedure to get M.Tech Private done..


Posted by: Ishan kamboj | February 26, 2006 at 12:48 PM

I have done B.E. in Mechanical Engineering from R.G.P.V., Bhopal,in 2005 now i want to do M.tech. in CAD/CAM , I am not Gate Qualified.

Posted by: Gyanendra Sharma | March 28, 2006 at 08:29 PM

Dear sir,

Please give advise and institute name and phone numbers for degree course in mechanical engineering for corresspondence course also master degree course of engineering and in arts and commerce line

Posted by: Atul Malsatar | June 03, 2006 at 12:57 PM

sir,
i have complted my B.Tech in Computer Sc. & Engg. from Maharishi Dayanand University, Rohtak(Haryana),i wanted to do M.Tech as distance education .please give tell me details to do my M.Tech .


Posted by: Vikas Verma | July 28, 2006 at 10:32 AM

dear sir,

i have a 3 yrs diploma in handloom technology and 1 year post diploma in textile chemistry from IIHT Varanasi,institute of govt of india,ministry of textles.
I also did 1 year certificate course in Production Technology from NIFT New delhi.
I want to study in MBA pls advice

Thx

Posted by: chanchal gupta | August 11, 2006 at 03:20 PM

dear sir,

i have a 3 yrs diploma in handloom technology and 1 year post diploma in textile chemistry from IIHT Varanasi,institute of govt of india,ministry of textles.
I also did 1 year certificate course in Production Technology from NIFT New delhi.
I want to study in MBA pls advice

Thx

Posted by: chanchal gupta | August 11, 2006 at 03:21 PM

I have completed DME. Want to do B.Tech in Mechanical Engg CORRESPONDENCE COURSE
PLEASE GIVE OR NAME SOME INSTITUTE IN INDIA I STAY IN Chennai.
REGARD
D.Ravikumar


Posted by: Ravi | September 19, 2006 at 10:58 AM

i Have completed DME ..i Want to do B.Tech(Mech) through corresspondence.Give me univercites and study centre address.i stay in chennai

Posted by: agnitr | September 19, 2006 at 11:00 AM

Sir,
I, Sudipto Ray, have done B.E.(MECHANICAL). I am presently working as a design engineer. I am interested in doing MTECH in Machine Design or Automobile through distance learning. please guide me for the same. please send me the procedure and the fees structure for the same.
thanking you
yours sincerely
Sudipto Ray

Posted by: SUDIPTO RAY | October 10, 2006 at 11:31 AM

dear sir,
i have been completed in D.C.E, I WANT TO STUDY B.E (correspondence)

SO CAN YOU TELL GIVE OR NAME SOME INSTITUTE IN TAMILNADU

Posted by: s.velmurugan | October 28, 2006 at 12:01 PM

Dear sir
I m DME,& I want to BTech By corrosponding
Please suggest 6 Guide me


Regards
Kishor

Posted by: kishor | November 23, 2006 at 11:28 AM

Hi sir ,

I have completed my Btech in csit (affiled in jntu )I passed in 2005 and i am working in polaris from last 6 months .I want to do Mtech- cse in jntu .
since i cannot do the full time couse by writing the gate exam .
I heard that jntu is providing a part time for mtech by non-gate but i donot have any information regarding that

so i have a small query regarding that
1) how to apply for non gate exam
2) when the exam will be
3) what is the portion for that
4)how many sem it will be and portion for each sem
5) what are the timming for the class
plz give a detail info regarding this as my mail id is suvarchala.seethepalli@polaris.co.in

Thanks and Regards
suvarchala


Posted by: suvarchala | December 04, 2006 at 11:57 AM

hello
I'm an Iranian men's suits and jacket wholesaler.my company sells about more than 60000 men's suits to our customer.
so I made a desicion to set up a men's suits factory.
but I don't know any about men's suits manufacturing and I don't have enough time to attend a course in a year.
so If you have any course in less than three month and specially concentrate about men's suits manufacturing, plesae inform me

thanks

MASOUD NAZERIHA

Posted by: MASOUD NAZERIHA | December 17, 2006 at 12:04 AM

sir,
i have recently completed 4 yr diploma in tool and die making and working in subros(auto air conditioning system) since last 1 aug 2006.
please guide me to take admission in degree course in mechanical by correspondance.
i am intrested in CAD/CAM courses in design(product and tool design)
please prefer institutes in delhi.
thanks

Posted by: jatin arya | December 17, 2006 at 02:19 PM

Dear sir,

I have completed +2 in 1994 due to personal resons i havw stopped my studies now i want to do diploma course or degree course in mechanical,production or MP&L related subject now my age is 30 and i am working in a car manufacturing company as a production technician can u please suggest me what i want to do to ..............


Posted by: G.Ashok Kuamr | December 26, 2006 at 08:24 AM

Hello,
I have done MCA(2003-06) currently working as software Devloper in Gurgaon.I want to do M.Tech in computer science through corresspondence.Give me reputed universites that is near to Delhi.

Posted by: Anurag Sharma | January 03, 2007 at 10:45 AM

Hi

I have done 10+2 in Science(Physics, Chemistry and Mathematics), graduation in BCA and MBA(Finance). Currently I am working with a BPO industry. I would like to pursue BTech in Computer Science as distance learning program.

Please advise me the details : which university is offering the same.

Regards
Jumani

Posted by: Jumani Deka | January 04, 2007 at 10:29 AM

I have completed DME. Want to do B.Tech in Mechanical Engg CORRESPONDENCE COURSE
PLEASE GIVE OR NAME SOME INSTITUTE IN INDIA I STAY IN Chennai.
REGARD

Posted by: prabu | January 05, 2007 at 07:50 PM

I have completed B.TECH IN COMPUTER SCIENCE AND ENGG IN 2006 FROM PUNJAB TEHNICAL UNVERSITY.pls give certeria for doing M.TECH IN CSE and fees of M.TECH COURES...PLS GIVE UR RESPONSE.....

THANKS

Posted by: sunny | February 12, 2007 at 01:54 PM

I completed my DECE diploma in 1989. I want to study BE / Btech in Electronics engg. in corespondence. Kindly suggest the universities / colleages in tamilnadu / chennai

Regards
Balamurugan

Posted by: N.Balamurugan | February 12, 2007 at 05:59 PM

Sir,
I completed my MCA in 2005 with 79% as a regular student of ANR College Affiliated to Acharya Nagarjuna University .Now i am intrested to do Mtech (Computer Science)/It please give me the details related to courses offering, eligibility, fee structure and duration

Thanks & Regards
Purnima.Dayaneni

Posted by: PurnimaDayaneni | February 12, 2007 at 06:37 PM

I have completed DME in Tamilnadu. I Want to do B.Tech in Mechanical Engg CORRESPONDENCE COURSE
PLEASE GIVE NAME OF THE SOME INSTITUTE


REGARDS

k.suresh

Posted by: K.Suresh | February 14, 2007 at 04:22 PM

sir,
i have complted my B.Tech in computersience (2003-2006)from Andhra University i wanted to do M.Tech as part-time course in JNTU HYDERABAD .please give tell me details to do my M.Tech .

Posted by: satya | February 16, 2007 at 02:26 PM

I have dome my Diploma In Mechanical Engineering way back in 1994.I even joined B.tech (Mech) through CCC in JNTU Hyderabad in 1996.But due to some circumastances I could not complete the course.

I would appreciate if you can suggest some good institute offering B.tech (Mech).

I need this information very badly.

Posted by: S.DHEERAJ | February 19, 2007 at 05:32 PM

I have completed msc (Mathematics)
i want to do M.tech (CSE)in jntu part time /eveninig college in hyd or any recog university in bangalore only part time or night college plz let me know the fee particulars

Posted by: ysubhash | February 23, 2007 at 04:01 PM

I have done my Diploma In Civil Engineering (3 year )from private institute Kerala. Since last 7 years im working in saudi arabia , as Junior Engineer Civil . I would like to Do Btec Civil AS A Correspondence . Is it possible to Do & let me know in Which university i can Do
I would appreciate if you can suggest some good institute offering B.tech (Civil through Correspondence

Posted by: Hashim Kharim | February 25, 2007 at 03:37 PM

sir,
i finished d.e.e.e. but i am working in production dept. so i wish to do production engineering by corres or by part time .pl give advice.


Posted by: krishnakumar | March 07, 2007 at 04:50 PM

Sir,
I have done B.Arch (Mumbai university). Currently doing M.Arch construction management (YCMOU). I want to do some correspondence or part time course in
Structural design. Please suggest me related courses.
Regards.


Posted by: Prachi Powale | March 08, 2007 at 05:32 PM

I have completed my Diploma in Mechanical Engineering (DME). Can I directly apply for MBA or is it required that I have a degree (BTech / BSC etc)?

Posted by: Mathew Thomas | March 08, 2007 at 07:43 PM

I have done Mechanical Engineering & Since last 6 years im working in India, as executive . I would like to Do Mtech eighter in Mechanical or in Quality through Correspondence courses only.
Will you please suggest the name of Instutute who are offerening such courses.

Posted by: Vibhanshu Bhardwaj | March 10, 2007 at 02:57 PM

sir
i am sameesh em,ia m working in embedded sofware.my qualification is Bsc electronics.i would like to know about the equialent BE(part time) courses avilable in bangalore,please send me the details
sameesh

Posted by: sameesh em | March 10, 2007 at 06:53 PM

Sir,

Ihave completed NCVT,NAC & Employed in an Auto component Mfg company located at Nasik.

Working as Service Cum Application Engineer from Chennai.

Iwould like to know which instuite (AICTE) offers Diplomo Course (Automobile / Mechanical) through distance Education. Since always I should be in roaming I prefer Distance Education than Part Time. Also suggest me where I can get Lateral Entry with above Qualification


Kindly Provide me the Details.

Thanks & Regards

B.Sureshbabu

Posted by: B.Sureshbabu | March 15, 2007 at 01:30 PM

sir
i'll do ITI in civil draughtsmanship and now i want to do diploma in civil engeneering. please suggest me name of part time private diploma collages in delhi and ncr.

Posted by: VIPIN | March 16, 2007 at 03:00 PM

Helo sir,
i have done BE in mechanical Engg. in year 2006 and currently doing job in a automobile company as a design engineer in noida, i want to do ME through distance learning further related to my design subjects ,so please suggest me some colleges...or suggest me some colleges in delhi which are providing part time courses related to product development and dsign....

Posted by: Suneet Kumar | March 17, 2007 at 08:57 AM

hello sir,
i have done BE in mechanical Engg. in year 2006 and currently doing job in a automobile company as a design engineer in noida, i want to do ME through distance learning further related to my design subjects ,so please suggest me some colleges...or suggest me some colleges in delhi which are providing part time courses related to product development and design....

Posted by: Suneet Kumar | March 17, 2007 at 08:59 AM

Sir,
I have done B.Arch (jntu university)and wants to do M.Arch urban design.
Please suggest me related nongate colleges/management colleges.
Regards.


Posted by: m.chiranjeevi | March 18, 2007 at 09:30 AM

i completed my m.sc maths interested in m.tech through non gate plz send me information which universities r giving the courses for entrance


Posted by: ch.v.v.satyanarayana | March 19, 2007 at 04:02 PM

I have completed my Diploma in Mechanical Engineering (DME). Can I directly apply for MBA or is it required that I have a degree (BTech / BE etc)?
OR 2nd Question
I have completed DME. Want to do B.Tech/BE in Mechanical Engg CORRESPONDENCE COURSE
PLEASE GIVE OR NAME SOME INSTITUTE IN INDIA Especially in Maharastra or in Mumbai/Pune

Posted by: vijay | March 19, 2007 at 07:38 PM

Sir,
I have done Bsc with botany and i want to do msc(cs)as a regular or distance.am i elligable to that course
Please Tell me that i can study that course or not

Regards
Digvijay singh

Posted by: Digvijay singh | March 23, 2007 at 02:31 PM

Sir,

I have completed my ITI (draught's man mechanical) & BCA, i want to do diploma in mechanical engineering (or) Bs or B tech if i am elgible.

I will able to do through distance learning only due to work.

please let me know the institutes that offer diploma or degree through distance learning

Regards

Balaji

Posted by: Balaji | March 24, 2007 at 10:33 AM

Dear Sir,
I'm presenthly working in U.A.E as production engineer but my my qualification is B.Sc , PGDCA . I wish to take Diploma in Civil Engineering , is it possible to do by correspondance . Really I need a diploma .. Hope you can guide me ...
Thanking you,
Yours faithfully
Brijesh

Posted by: Brijesh | March 24, 2007 at 04:31 PM

SIR I M DOING B.E IN CIVIL ENGG. AND I WANT TO DO CORRESSPONDENCE COURSE IN STRUCTURAL ENGG. SO PLEASE TELL ME THE PRESTIGIOUS INSTITUTES WHICH OFFER SUCH TYPES OF COURSES.

Posted by: ABHISHEK UPADHYAY | March 25, 2007 at 09:30 PM

Respected Sir,
I have done my Degree in Mechanical Engineering and wants to do M.Tech/ M.E. in Mechanical Design or Thermal Engineering.
Please suggest me related nongate colleges/management colleges in Maharashtra State.

Regards.
Sangram


Posted by: Sangram N. Hirugade | March 26, 2007 at 09:41 AM

Sir
i have completed my diploma in textile technology. what is the main qualification to study MBA? or any master degree MTech in textile technology please give the advice to me

Posted by: bharathi | March 26, 2007 at 12:47 PM

Sir
i have completed my diploma in textile technology. what is the main qualification to study MBA? or any master degree MTech in textile technology please give the advice to me

Posted by: bharathi | March 26, 2007 at 12:48 PM

'I have done Diploma in Textile technology in 1996. I want to do a correspondance Graduation/B Tech course in Textile technology. Pl. suggest'

Posted by: Ajit Kumar Nayak | March 31, 2007 at 05:44 PM

ive discontinued my b.e and am working in a bpo,but i want to do mba in correspondence,plz guide me in this sir

Posted by: arun | March 31, 2007 at 09:28 PM

Sir, I want to do a civil Engg Degree (corresspondence) course as i have diploma in civil engg. I am employed now. Please help me know how i can proceed .

Posted by: Rabi narayan Dash | April 01, 2007 at 05:05 PM

I have completed my B.tech,i want to do M.tech through correspondene/part time.is there any % limits.please send the information.

Posted by: S.Ramesh | April 03, 2007 at 07:53 AM

I have done Diploma in Mechanical Engineering in 1991. I want to do a correspondance Graduation/B Tech course in Mechanical Engineering. Pl. suggest college/institution.

Posted by: Milind Lonandkar | April 03, 2007 at 07:26 PM

Sirs,

I have done my B.Tech in Computer Science and my ambition is to do M.Tech in Computer Science or Information Technology. I am currently working in Reliance Infosolutions Pvt. Ltd., Mumbai. I would like to know if any of the universities are offering this courses through distance education mode. Kindly let me know this information.

Thanks & Regards,
Vineeth G.

Posted by: Vineeth G. | April 04, 2007 at 07:05 PM

Sir,
I completed my diploma in mechanical engineering in 1996 & presently working at oil industries located eastern India, want to do a corrospondence BE/Btech. Pls suggest institutions.

Regards,
Partha

Posted by: Partha Mukherjee | April 06, 2007 at 02:54 PM

Respected sir,

I had studied the Textile course at 3years.

Iam doing the job now.

After that I want to study in B.Tech in textile.

regarding my study with doing the job.

Pls advice me

Posted by: siddu | April 06, 2007 at 06:11 PM

I have completed my 11th & I want to do Deiploma in Handloom. Can you suggest the university and colleges alongwith their address & contact details.

Thanks

Posted by: Prakash R shah | April 06, 2007 at 06:56 PM

Respected Sir,
I have done B.B.A. in Madras university. Currently doing first year M.B.A. through correspondence in Madras university. I want to do some correspondence or part time course in Electronics in chennai. Please suggest me related courses.
Regards
Mahesh

Posted by: Mahesh | April 07, 2007 at 05:59 PM

hello sir,
i wants to know abt. any university that provide M.Tech (Computer) through distance learning or part time.pls-pls tell me. i search a lot on net but did'nt find any university.

thanks
harninder kaur

Posted by: harninder kaur | April 11, 2007 at 10:15 AM

It is very is method to get infornation abt education and other admission details it so useful to students as well as working persons

Posted by: Ravi | April 12, 2007 at 12:12 PM

sir,
i am student of final year b.tech in chirala engineering collage .i have to complite my b.tech in may2007 .i have got gate rank in feb2007 rank is 2639 in e.e.e plz suggest me for join in m.tech 2007 in electrical


ashok kumar gali


Posted by: ASHOK KUMAR GALI | April 14, 2007 at 06:43 PM

sir,

want todo the be structral engg correspodence cources so pls suggest me institute in mumbai
i stay in mumbai
thanks

Posted by: hemant mahajan | April 17, 2007 at 02:46 PM

Sir,

I am having I. Sc with biology and B.A (Pol Sc.) and working in Engineering firm. I would like to do technical course by correspondance. you pl suggest me where these type of course in India what sort of duration of the course.

Vinay

Posted by: Vinay Kumar Dubey | April 17, 2007 at 05:10 PM

Sir i want to Diploma and Degree correspondence course in Textile Technology from India. so please mail me the above mentioned course details.Thanking you

Posted by: manickam | April 18, 2007 at 09:48 AM

sir,i am b.tech from madras university i want to do ME(cse) from jntu university in evening/parttime please let me know the subjects offered for the same since iam an ECE graduate in btech.Thanking you

Posted by: revathy balamurugan | April 20, 2007 at 05:10 PM

sir,i am b.tech from madras university i want to do ME(cse) from jntu university in evening/parttime please let me know the subjects offered for the same since iam an ECE graduate in btech.Thanking you

Posted by: revathy balamurugan | April 20, 2007 at 05:10 PM

sir, i am M.Sc. mathematics with 69% from ccs university & working as a pgt maths teacher in a school. can i join mtech part time course or any other coursesregarding my education. can you suggest me?
thankig you.

Posted by: minakshi | April 25, 2007 at 08:30 AM

Sir,I am a B.Tech in Electrical engineering.Now i want to do the part time M.E in Electrical engg.
Please provide me the addresses os colleges in mumbai who provides the part time M.E.

Posted by: ImranBaghban | April 27, 2007 at 05:44 PM

Dear Sir,

I have completed my B.Sc Statistics, and now i want to do any Engineering degree as a corrospondance course

pls help me accordingly

regards,
kings

Posted by: kings | May 01, 2007 at 10:52 AM

I have completed my ITI in MEchanical Draughtsman in 2004 & NCTVT in 2005 now i want to do a Diploma
Iwould like to know which instuite (AICTE) offers Diplomo Course (Automobile / Mechanical) through distance Education in pune Maharastra. Since always I should be in roaming I prefer Distance Education than Part Time. Also suggest me where I can get Lateral Entry with above Qualification


Kindly Provide me the Details.

Thanks & Regards

J. Rohidas


Posted by: Rohidas | May 04, 2007 at 11:11 AM

Sirs,

I have done M.C.A., (Master of Computer Applications) and my ambition is to do M.Tech in Computer Science. Im currently working as Lecturer. I would like to know if any of the universities are offering this course through distance education mode. Kindly let me know this information.

Thanks & Regards,
G.Purushothaman

Posted by: G.Purushothaman | May 05, 2007 at 06:44 PM

Dear sir

I am copmlete B.Sc(PMCs) in bangalory university in 2006 so i am intrest to study in MBA so which course is benifits my qualification so plz help me.

Posted by: vijay kumar d | May 09, 2007 at 04:52 PM

Dear sir

I am copmlete B.Sc(PMCs) in bangalory university in 2006 so i am intrest to study in MBA so which course is benifits my qualification so plz help me.

Posted by: vijay kumar d | May 09, 2007 at 04:54 PM

hello sir
i am ITI qualified.i want to study diploma in civil engineering(part time). in delhi & NCR. i like to know in which collage are offered part time diploma.
am working in gurgaon

Posted by: sunil kumar | May 11, 2007 at 12:49 PM

hello sir,
i have completed B.E. Electronics & Communication in gujarat university,
i want join M.Tech,
but i am non-Gated candidate,
what can i do for take admission in any M.tech colleages,

also i m working in one embedded company in gujarat as a design engg.

Posted by: bharat gohel | May 11, 2007 at 07:06 PM

dear sir,
i completed my diploma and at present working in tvs hosur.
i want to do my B TECH MECH lateral entry in any colleges through part time or corres
i want addresses of the colleges which prefer
thanks


Posted by: JOTHIRAM.V | May 11, 2007 at 07:40 PM

Hi Sir,
I am ITI qualified and working in MNC company i whant to study the corespondence BE or BTech this is possible or notpossible please advice me.

Yours Truly
Mohalingam

Posted by: mohalingam | May 13, 2007 at 04:22 PM

i wish to be study fashion technology in chennai circumference. i studied 10th std.please inform me the colleges as well as the other informstion please...


Posted by: SEENI VASAN | May 14, 2007 at 11:26 AM

sir, my self Ravi Bhatia,presently working with MNC co.as a sales & marketing,but i have done Automobile Diploma in Diesel vehicle,i want Automobile Engg. corressponded in this same course,so please breif me what i should to do

Posted by: Ravi bhatia | May 15, 2007 at 05:06 PM

i am a I.T.I ref @ airconditing and intermediate m.p.c i want to study in specilization in r@A.C OR DIPLOMO CORROSPONDENCE

Posted by: b.b.sitaramam | May 20, 2007 at 12:00 AM

I had completed my Diploma in engineering in Electrical instrumentation in the year 2002 and currently employed in ABB ltd. however I want to pursue my B.tech/BE through lateral entry. I am ready to resign for carrying out my higher education so kindly suggest where and how can I get admission. I don't get time for preperation of any examination so kindly give the details of those colleges where I can get admission through merit basis only.

Posted by: Manzoor Hasan | May 20, 2007 at 08:55 PM

IAM A B.TECH IN MECHANICAL ENGINEERING WORKING AS FEA ANALYST?
PLEASE MAIL ME THE DIFFERENT M.TECH PROGRAMMES (AERONAUTICAL OR MECHANICAL)IN INDIA
AVAILABLE AS DISTANCE EDUCATION PROGRAMMES?

MAIL TO: BUBU_310@YAHOO.COM


Posted by: BHUJANGA KUMAR ADAPA | May 20, 2007 at 09:40 PM

Sir/Mam,
I am a bachelor in civil engg,and m working at present therefore i want to pursue further my career in structural designing .
Kindly provide me with information about prestigious universities/colleges who provide Mtech courses in STRUCTURAL ENGG.Iam presently working in Delhi.
Thanks/Regards

Posted by: Rinku Taur | May 22, 2007 at 02:05 PM

sir i have done my B-tech in mechanical engg . Plz guide me for correspondence M-tech in Mech engg(any Subject) From any ACITE approved University
Thanks

Posted by: Rajesh Kumar | May 26, 2007 at 11:58 AM

Sir, i have completed my diploma in tamil Nadu (2005). I an working in banglore. Now i would like to do B.E. mech. For which i just applied in indian institution of industrial engg. Navi, mumbai. Let me know whether they are giving exact B.E. or not. Could please suggest me. Thanks & regards sathish.R 09980807580

Posted by: sathish rajendar | May 26, 2007 at 07:59 PM

sir,
I have done my diploma in electronics & comunication in goa.Presently i am working in very good company.
i want to do corespondance B.E.in goa.sugest me any college in goa or any other way which will give me graduate standard.Without leaving my job.

Posted by: mayur | May 27, 2007 at 03:49 PM

hello sir:this is ganesh,iam going to finish my M.Sc IT in annamalai university, june ending , i like to study M.Tech studies in chennai particularly in Madras University, so kindly help me sir, thanking u, bye.reply me.

Posted by: ganesh nagaraj | May 29, 2007 at 10:26 AM

Sir,
I have done my B.E in mechanical engg fron NIE Mysore. Plz guide me for correspondence M-tech in Mech engg(any Subject).

While i am searching in the net, got that Institute of Engineers - Calcutta, is offering correspondence M-tech.

But i want to know any other recognised institutions are giving the post graduation.

Thanks

Posted by: Vishwaprasad R | May 30, 2007 at 12:10 PM

Sir,
Iam B.Arch & teaching in ips.indore as lecturer, want to do M.Arch Part time .ithink i can do it from the here only .
But the admission forms for 07 r not available on site .kindly guide me.
thanhs

Posted by: ar.suman sharma | May 30, 2007 at 02:42 PM

hi sir this is anirudh singh. right now i m studying in diploma of automobile engineering. i want to do correspondence degree after completing my diploma so could please tell any institude where i can get admission.thanking you

Posted by: anirudh singh | May 31, 2007 at 02:26 PM

hi sir this is anirudh singh. right now i m studying in diploma of automobile engineering. i want to do correspondence degree after completing my diploma so could please tell any institude where i can get admission.thanking you

Posted by: anirudh singh | May 31, 2007 at 02:26 PM

sir,
i have complted my B.Tech in mechanical (2003-2007)from J.N.T.University i wanted to do M.Tech as part-time course .please give tell me details to do my M.Tech .plzzzzz dont mind sir.........................


Posted by: seshank | June 01, 2007 at 02:05 AM

I had completed DME AND I want to further studies through distance engg.MECHANICAL COURSES(BE/BTECH-MECH)
Please give the name of recognised university list by Indian govt/Oversease as soon as possible

Thanks and regards,
swami

Posted by: r.swaminathan | June 01, 2007 at 03:24 PM

res sir i have complete my diploma in mechanical engineering (correspondance courses).I want to further studies through distance education(correspondance/part time courses).MECHANICAL COURSES(BE/BTECH-MECH).Please give me name of recognised university listed by indian government. iam staying in trichy. pls give me details as soon as posible thanking u sir.
by
hanumantha rao

Monalisa Chatterjee

Sir/Ma'am,
I am presently pursuing my M.Sc. in applied chemistry.I am interested to fetch a B.Tech. in Chemical Engg.thereafter.Would be glad if you kindly let me know about the institutes in India from where I can pursue it, as in most cases, I would be facing an age restriction.

rajendra

i am rajendra
i have finished my ITI(electricial).
but now i have stronge asprie to become a software eng.
i am always afride about that
bacicaly i am poor
so i am working as electrician.
i want do any course through correspodence regarding software eng.

sathesh

sir i've completed my ITI in tool and die maker and have been working in reputed organistions(tvs,eastman.). Now i'm interested in doing my majors in tool design, and i'm looking forward to some best colleges in banglore and tamilnadu.. please do the needfull

Shantanu

Sir/Ma'am,
I am presently pursuing my M.Sc. in Mathematics.But my percentage is not good. It is only 50%. I would be glad if you kindly let me know about the courses & the institutes in India by which i will be establishbed & from where I can pursue it, as in most cases, I would be facing an age restriction.

The comments to this entry are closed.


  • Google


    www Prayatna

Acknowledgements


GA